First-Time Guide to Palm Beach Drift Diving
Benjamin Hadfield Nov 16, 2026
Drift diving is a term that can put a lot of fear in a new diver, especially someone from a landlocked state. Maybe you learned in a calm quarry, lake, or reservoir, where the biggest concern was the chance of having a “Braille” dive because the viz was what it was.
Here in South Florida, most ocean dives have some current. Around here, Floridians may complain when there is no current: “My legs are tired. I had to kick the whole dive!”
That can sound backward at first. A drift dive works best when you work with the water, stay with your buddy and group, and let the current carry you along the reef or wreck.
That does not mean every current is easy or every drift dive is right for every diver. Current can change direction and speed, sometimes at different depths. DAN notes that current may be calm at the surface and moving below, and that drift dives can range from leisurely to challenging. They take preparation, a clear briefing, and the right experience, instructor, or dive guide for the conditions. DAN’s overview of current dives is a useful reference.
What the current is doing
In our part of South Florida, a north current is common, but direction and speed are not fixed. Tide, weather, depth, and reef or wreck shape all affect what you feel.
When the current stops or runs south, we pay attention. In our local experience, that can happen around a change in weather or visibility, but it does not predict a storm or poor visibility by itself. We look at the full forecast and listen to the captain’s decision about the site.
The current can also move differently at different depths. I have seen the water between about 40 and 20 feet move significantly faster than it does deeper down or at the surface. I have also seen it move slower. Do not assume the surface tells you exactly what is happening below.
A reef line or wreck may offer some relief from the flow. A ledge can break up the current and give you a moment to look around. Read those features, stay neutrally buoyant, and do not touch coral, sponges, or the wreck. Stay out of overhead areas unless you have the training and plan for them.
Once you are comfortable, a drift can feel like riding an airport people mover. You are moving without working hard to make it happen. Fighting the current uses energy and gas. Let the water do its thing when it is safe.
CHECK THE CONDITIONS BEFORE YOU GO
Review South Florida seas, weather, and dive reports before making plans. Use them to prepare; the captain confirms the site and whether conditions fit the trip.
Your line, float, and DSMB
On a strong-current day, a line does not always run straight up. The current may push a buoy down-current and angle the line away from you. A towed float can feel like a kite and add drag. Account for that pull, keep the line under control, and never wrap it around yourself or clip it to your gear.
If you deploy a DSMB from depth, plan for enough line to reach the surface. DAN recommends at least 50 percent more line than the deployment depth: at least 90 feet for a 60-foot deployment. That is a minimum, not a guarantee; current and line angle can require more. Follow your training and the equipment instructions. Read DAN’s DSMB guidance.
SMB and DSMB are often used loosely. A DSMB is designed for deployment from depth and has an over-pressure valve for expanding air. A surface marker without that valve should be inflated at the surface. Know which buoy you have and use it as designed. DAN explains the difference.
Practice DSMB deployment under proper instruction before you need it in current. Keep the spool free in your hand. Do not clip it to yourself or wrap line around your hand, arm, or gear. Your buddy should watch while you deploy; stay in control of your buoyancy and depth.
A DSMB is a signaling tool, not a tow rope or a reason to rush upward. If deployed during your planned ascent, keep the ascent controlled, follow the dive plan, and complete the planned safety stop when the profile and conditions allow.
Reef hooks and holding position
A reef hook can help a trained diver hold position when the briefing calls for one. It may help a group consolidate during a drift dive. DAN discusses reef hooks as one current-diving tool.
Use a hook only where the operator or guide identifies an appropriate place. Do not hook living coral, sponges, animals, or a wreck surface unless the guide has said it is suitable. Keep buoyancy under control and do not stay behind when the group moves on.
If you are looking for lionfish or lobster, stay with your buddy and group. The hunt does not get to overrule the dive plan.
Do the work on the boat
A drift dive begins before anyone gets in the water. The boat is where we make the plan and check the gear. If there is something to brief, say it on board—not after the group is already moving.
Listen for the site, expected depth, entry, guide’s location, time and gas limits, signals, lost-buddy plan, DSMB plan, and pickup. Ask questions. Tell the crew if it is your first drift dive, you have been out of the water for a while, or you are unsure about the entry. The captain and crew need to know before choosing how to run the dive.
Do your buddy check before entering. Is your gas on? Does your regulator breathe normally? Watch the SPG while you breathe. Does your BCD inflate and dump? Are your weights secure? Do you have mask, fins, DSMB, and spool? Are hoses and straps secured with nothing dangling that can snag?
Agree on signals and the lost-buddy plan. Know where the guide will be, how you will stay with the group, and how to signal the boat if you surface away from the others. If the plan or equipment check is unclear, sort it out with the crew before entering.
Positive entry and negative entry
Some dives use a positive entry: you enter with air in your BCD, establish yourself at the surface, and descend when directed. That can fit some sites and conditions, but keep the surface check brief. The current is still moving you while you talk or wait, and a small target can pass by.
A negative entry is used on some dives when the group needs to reach a reef or wreck promptly. You enter with no air in your BCD and begin a controlled descent. It depends on the current, site, and dive plan. DAN’s current-diving guidance discusses entries as part of the plan.
A negative entry is not a race to the bottom. Everyone needs to understand the plan first. Complete gear and buddy checks on the boat. In the water, equalize early and often, keep track of your buddy, and descend under control toward the planned target.
If your mask is off, your regulator is not working, you cannot equalize, or you cannot descend, do not keep going just to reach the reef or wreck. Signal your buddy and crew, get positive buoyancy as needed, and follow the agreed procedure to change or end the dive. The dive can wait.
A negative entry is appropriate only when you are trained, prepared, and comfortable with the plan. Tell the crew if you have concerns so they can explain the procedure and decide whether it fits your experience.
A simple first-drift-dive plan
- Before the boat leaves: Tell the crew if this is your first drift dive or you are returning after time away. Ask whether the planned site and entry fit your experience.
- During the briefing: Confirm the route, depth and gas limits, guide, buddy signals, lost-buddy plan, marker, and pickup procedure. Finish the gear check on board.
- At entry: Follow the planned positive or negative entry. Find your buddy and guide, equalize early, and descend under control.
- At the surface: Stay with your buddy, keep your marker visible, and follow the crew’s pickup instructions. Stay clear of the propeller.
Once you are on the reef or wreck
When you reach the planned area, locate your buddy and guide. Let the group come together where the briefing says. Take a moment to orient yourself to the reef or wreck before looking around.
Keep streamlined and avoid kicking hard against the current. Read the reef or wreck contours, but do not grab or damage the site. Move deliberately and check your depth, time, gas, and buddy.
The current may make a dive feel easy because you are finning less, but it can carry you farther than expected. Keep checking gas, depth, no-decompression limits, and time.
If you lose sight of your buddy, use the procedure you discussed on the boat and learned in training. Do not chase blindly or keep drifting while hoping to find them. Decide what to do before the dive.
GEAR SPOTLIGHT: OCEANIC O.I. WRIST COMPUTER
Your dive computer helps you monitor depth and dive time during the dive. It does not replace the briefing, your buddy plan, or staying within your limits.
The ascent and pickup
The ascent and pickup are part of the drift plan. Watch gas and your computer, and follow the guide’s or boat’s instructions about when and where to ascend. If deploying a DSMB, look above you first, keep the spool under control, and make a slow, planned ascent.
At the surface, stay with your buddy. Inflate your BCD, keep your regulator or snorkel available if conditions are rough, and use your marker and audible signal as briefed. Do not assume the boat can see you just because you can see it.
Wait for the crew’s instructions and stay clear of the propeller. Do not swim toward the boat unless told to. The pickup may take time if the boat and divers move at different speeds. Keep your marker visible and follow the boarding procedure.
Let the current do its work
Drift diving deserves respect, but it is not something to fear. The work is being prepared, listening to the briefing, staying with your buddy, and not fighting the ocean when it is safe to let it carry you.
A good drift can feel like a magic-carpet ride along a reef or wreck. You see more without kicking the whole dive. It may mean less effort and lower gas use, but you still monitor your gas and stay within the plan.
If you are new to drift diving, say so before booking and when you meet the crew. Ask about the entry, pickup, marker, and whether the site fits your experience. A good first drift is one where you understand the plan before hitting the water and can relax enough to enjoy the ride. If the conditions or procedure do not fit your comfort and experience, talk with the crew about your options.
READY TO GET IN THE WATER?
Check the charter schedule and choose a trip that fits your experience. Review departure details before booking.
Follow Stuart Scuba
Share this guide with your dive buddy, and follow along for local dive updates, training, and marine-life photos:


